The DE0-Nano board introduces a compact-sized FPGA development platform suited for prototyping circuit designs such as robots and "portable" projects. The board is designed to be used in the simplest possible implementation targeting the Cyclone IV device up to 22,320 LEs.


The DE0-Nano has a collection of interfaces including two external GPIO headers to extend designs beyond the DE0-Nano board, on-board memory devices including SDRAM and EEPROM for larger data storage and frame buffering, as well as general user peripheral with LEDs and push-buttons.

The advantages of the DE0-Nano board include its size and weight, as well as its ability to be reconfigured without carrying superfluous hardware, setting itself apart from other general purpose development boards. In addition, for mobile designs where portable power is crucial, the DE0-Nano provides designers with three power scheme options including a USB mini-AB port, 2-pin external power header and two DC 5V pins.

 Size:49x75.2mm

User Manual


    Cyclone® IV EP4CE22F17C6N FPGA

        22,320 Logic elements (LEs)
        594 Embedded memory (Kbits)
        66 Embedded 18 x 18 multipliers
        4 General-purpose PLLs
        153 Maximum FPGA I/O pins

    Configuration Status and Set-Up Elements

        On-board USB-Blaster circuit for programming
        FPGA Serial Configuration Device (EPCS)

    Expansion Header

        Two 40-pin Headers (GPIOs) provides 72 3.3V I/O pins
        Two 5V power pins, two 3.3V power pins and four ground pins
        One 26-pin header provides 16 3.3V digital I/O pins and 8 analog input pins to connect to analog sensors, etc

    Memory Devices

        32MB SDRAM
        2Kb I2C EEPROM

    General User Input/Output

        8 green LEDs
        2 debounced push-buttons
        4 dip switches

    G-Sensor

        ADI ADXL345, 3-axis accelerometer with high resolution (13-bit)

    A/D Converter

        NS ADC128S022, 8-Channel, 12-bit A/D Converter
        50 ksps to 200 ksps

    Clock System

        On-board 50MHz clock oscillator

    Power Supply

        USB Type mini-AB port (5V)
        Two DC 5V pins of the GPIO headers (5V)
        2-pin external power header (3.6-5.7V)

Connectivity

- Connect D5M

        Connect with 5-megapixel CMOS Sensor (D5M)



- Connect LTM

        Connect with LCD Touch Screen Module (LTM)


 

Video Demonstration





Escreva um comentário

Nota: HTML não suportado.
    Ruim           Bom

Placa de Desenvolvimento Terasic DE0-Nano FPGA

  • R$ 1.200,00

Voltar ao inicio