+55 83 98795-5450
Modelo: OBG4000-R103-2EP-IO-V31
Sensor Fotoelétrico Retrorrefletivo Pepperl Fuchs OBG4000-R103-2EP-IO-V31
Marca: Pepperl Fuchs
Modelo: OBG4000-R103-2EP-IO-V31
Referência: 267075-100310
Descrição do Produto
Retroreflective sensor with polarization filter for clear object detection
General specifications
Effective detection range 0 ... 3.5 m in TEACH mode ; 0 ... 4 m at switch position "N"
Reflector distance 0 ... 3.5 m in TEACH mode ; 0 ... 4 m at switch position "N"
Threshold detection range 5 m
Reference target H85-2 reflector
Light source LED
Light type modulated visible red light
LED risk group labelling exempt group
Diameter of the light spot approx. 170 mm at a distance of 3.5 m
Opening angle approx. 5 °
Ambient light limit EN 60947-5-2
Functional safety related parameters
MTTFd 600 a
Mission Time (TM) 20 a
Diagnostic Coverage (DC) 0 %
Indicators/operating means
Operation indicator LED green:
constantly on - power on
flashing (4Hz) - short circuit
flashing with short break (1 Hz) - IO-Link mode
Function indicator Yellow LED:
Permanently lit - light path clear
Permanently off - object detected
Flashing (4 Hz) - insufficient operating reserve
Control elements Teach-In key
Control elements 5-step rotary switch for operating modes selection
Contrast detection levels 10 % - clean, water filled PET bottles
18 % - clear glass bottles
40 % - colored glass or opaque materials
Adjustable via rotary switch
Electrical specifications
Operating voltage 10 ... 30 V DC
Ripple max. 10 %
No-load supply current < 25 mA at 24 V supply voltage
Protection class III
Interface
Interface type IO-Link ( via C/Q = pin 4 )
Transfer rate COM 2 (38.4 kBaud)
IO-Link Revision 1.1
Min. cycle time 2.3 ms
Process data width Process data input 2 Bit
Process data output 2 Bit
SIO mode support yes
Device ID 0x110A03 (1116675)
Compatible master port type A
Output
Switching type The switching type of the sensor is adjustable. The default setting is:
C/Q - Pin4: NPN normally open / dark-on, PNP normally closed / light-on, IO-Link
/Q - Pin2: NPN normally closed / light-on, PNP normally open / dark-on
Signal output 2 push-pull (4 in 1)outputs, short-circuit protected, reverse polarity protected, overvoltage protected
Switching voltage max. 30 V DC
Switching current max. 100 mA , resistive load
Usage category DC-12 and DC-13
Voltage drop ≤ 1.5 V DC
Switching frequency 500 Hz
Response time 1 ms
Conformity
Communication interface IEC 61131-9
Product standard EN 60947-5-2
Approvals and certificates
UL approval E87056 , cULus Listed , class 2 power supply , type rating 1
Ambient conditions
Ambient temperature -20 ... 60 °C (-4 ... 140 °F)
Storage temperature -40 ... 70 °C (-40 ... 158 °F)
Mechanical specifications
Housing width 15 mm
Housing height 43.9 mm
Housing depth 26.7 mm
Degree of protection IP67 / IP69K
Connection M8 x 1 connector, 4-pin
Material
Housing PC (Polycarbonate)
Optical face PMMA
Mass approx. 12 g