Módulo de segurança AS-Interface Pepperl Fuchs VAA-2E1A-G10-SAJ / EA2J-1M

Modulo ASI Pepperl Fuchs VAA-2E1A-G10-SAJ/EA2J-1M G10  1 Metros

Marca: Pepperl Fuchs

Modelo: VAA-2E1A-G10-SAJ/EA2J-1M

Referência: 229182

Descrição do Produto

G10 safety module

2 safety inputs and

1 standard electronic output

General specifications

Node type Safety-Slave

AS-Interface specification V3.0

Required master specification ≥ V2.1

UL File Number E223772 "For use in NFPA 79 Applications only"

Indicators/operating means

LED FLT error display; LED red

red: communication error or address is 0

LED AS-i AS-Interface voltage; green LED

green: voltage OK

flashing green: address 0

LED IN switching state (input); 2 LED yellow

LED OUT Switching state (output); LED yellow

Electrical specifications

Rated operating voltage 26.5 ... 31.6 V from AS-Interface (PELV)

Rated operating current ≤ 90 mA

Protection class III

Surge protection overvoltage category III

Rated insulation voltage 32 V

Pulse withstand voltage 0.8 kV

Input

Number/Type 2 safety-related inputs for mechanical contacts, crossed-circuit monitored:

2 single-channel contacts: up to category 2/PL c to ISO 13849-1 or

1 2-channel contact: up to category 4/PL e to ISO 13849-1

Supply from AS-Interface

Voltage 20 ... 30 V DC pulsed

Current input current limited ≤ 15 mA,

short-circuit protected

Output

Number/Type 1 conventional electronic output, PNP

Supply from AS-Interface

Voltage (UASI - 7.0 V) ≤ UOUT ≤ UASI

Current 50 mA , short-circuit/overload protected

Directive conformity

Electromagnetic compatibility

Directive 2014/30/EU EN 62026-2:2013 EN 61000-6-2:2005 EN 61000-6-4:2007

Machinery Directive

Directive 2006/42/EC EN ISO 13849-1:2015 EN ISO 13849-2:2012 EN 62061:2005 + AC:2010 + A1:2013 + A2:2015

Standard conformity

Degree of protection EN 60529:2000

Fieldbus standard EN 62026-2:2013

Electrical safety IEC 61140:2009

Emitted interference EN 61000-6-4:2007

AS-Interface EN 62026-2:2013

Noise immunity IEC 62026-2:2013 EN 62061:2005 EN 61000-6-2:2005

Functional safety EN ISO 13849-1:2015 EN ISO 13849-2:2012 EN 62061:2005 + AC:2010 + A1:2013 + A2:2015

Programming instructions

Profile S-7.B

IO code 7

ID code B

ID1 code F

ID2 code 0

Data bits (function via AS-Interface) input output

D0 dyn. safety code 1 OUT 1

D1 dyn. safety code 1 -

D2 dyn. safety code 2 -

D3 dyn. safety code 2 -

Parameter bits (programmable via AS-i) function

P0 communication monitoring

P0 = 1 (default settings), monitoring = ON, i.e. if communication fails, the outputs are de-energised

P0 = 0, monitoring = OFF, if communication fails, the outputs maintain their condition

P1 not used

P2 not used

P3 not used

Approvals and certificates

UL approval cULus Listed, Type 1 enclosure

Ambient conditions

Ambient temperature -20 ... 60 °C (-4 ... 140 °F)

Storage temperature -25 ... 80 °C (-13 ... 176 °F)

Relative humidity < 95 %

Altitude ≤ 2000 m above MSL

Shock and impact resistance 30 g, 11 ms in 6 spatial directions 3 shocks

10 g, 16 ms in 6 spatial directions 1000 shocks

Vibration resistance 0.75 mm 10 ... 57 Hz , 5 g 57 ... 150 Hz, 20 cycles

Pollution degree 3

Mechanical specifications

Degree of protection IP67

This protection class is achieved by using the AS-Interface flat cable VAZ-FK-S-YE

Connection AS-Interface: AS-Interface flat cable

Inputs/outputs: open conductor ends

Material

Contacts open conductor ends with connector sleeves

Housing PBT

Cable PUR

Mounting screw Stainless steel 1.4305 / AISI 303

Cable

Sheath diameter ∅4.8 mm

Bending radius > 8 x cable diameter, fixed > 10 x cable diameter, moving not appropriate for conveyor chains

Color black

Cores 6 x 0.25 mm2

Length 1 m

Mass 200 g

Tightening torque, fastening screws 1.65 Nm