Multímetro Digital True-RMS Fluke 28II Ex
Modelo: Fluke 28 II Ex
Now there’s one intrinsically safe digital multimeter (DMM) you can use in IIC (gas), in Zone 1 and 2 and IIIC (dust), Zone 21 and 22. Whether you work in petroleum, chemical, or pharmaceutical environments, all the test and troubleshooting power you need is packed into the most rugged intrinsically safe (IS) DMM Fluke has ever built. The Fluke 28 II Ex is also waterproof, dust-proof and drop-proof. You’ll be equipped to handle any situation, inside and outside of hazardous zones, without compromising compliance or measurement performance.
All the measurement functions of our most popular industrial DMMs
One tool equips you with all the testing and troubleshooting power you need wherever you go––inside or outside ATEX zones 1,2,21, or 22. No need to carry different meters for different areas, or worry about crossing through an Ex-required zone with a non-Ex rated instrument.
Easy to use
Important extras keep you productive all day long in less than optimal conditions.
Easy to service in the field
Access to the separate battery compartment makes it easy to change batteries or fuses without jeopardizing instrument calibration.
Accuracy Specifications
Accuracy specifications are shown as ±(% of reading + number of digits)
DC voltage
Range: 0.1 mV to 1000 V
Accuracy: ±0.05% + 1
AC voltage
Range: 0.1 mV to 1000 V
Accuracy: ±0.7% +4
DC current
Range: 0.1 μA to 10 A
Accuracy: ±0.2% + 4
AC current
Range: 0.1 μA to 10 A
Accuracy: ±1.0% + 2
Resistance
Range: 0.1 Ω to 50 MΩ
Accuracy: ±(0.2% + 1)
Conductance
Range: 60.00 nS
Accuracy: ±(1.0% + 10)
Diode Test
Range: 2.0 V
Accuracy: ±(2.0% + 1)
Duty Cycle
Range: 0.0% to 99.9%
Accuracy: Within ±(0.2% per kHz + 0.1%) for rise times <1 µs
Capacitance
Range: 10 nF to 9999 μF
Accuracy: ±(1.0% + 2)
Frequency
Range: 0.5 Hz to 199.99 kHz
Accuracy: ±(0.005% + 1)
Temperature
Range: -200°C to +1090°C (-328°F to +1994°F)
Accuracy: ±(1.0% + 10)°C [±(1.0% + 10)°F]
Display counts: 6000 counts/19,999 counts in high-resolution mode
Peak capture: Record transients up to 250 us
Min/Max/Avg recording: Display signals up to approximately 100 ms
Accuracy specifications are shown as ±(% of reading + number of digits)
Safety Certifications
ATEX
II 2 G Ex ia IIC T4 Gb
II 2 D Ex ia IIIC T130°C Db
I M1 Ex ia I Ma
NEC-500: Class I, Div 1, Groups A-D, 130°C
IEXEx
Ex ia IIC T4 Gb
Ex ia IIIC T130°C Db
Ex ia I Ma
GOST R Ex:
Overvoltage protection: Measurement Category III, 1000 V, Pollution Degree 2
Measurement Category IV, 600 V, Pollution Degree 2
IP rating IP67
General Specifications
Power: Three AAA batteries
Battery life: 400 hours
Display LCD: with backlight
External protection: Rubber holster
Size with holster (H x W x L): 6.35 x 10.0 x 19.81 cm (2.5 x 3.93 x 7.8 in)
Weight with holster: 698.5 g (1.54 lb)