Solicite uma cotação
Compre pelo Whatsapp 83 9 8795.5450

Osciloscópio Portátil Fluke ScopeMeter 190 Série II 190-202/S, Osciloscópio Portátil, Fluke, ScopeMeter 190 Série II 190-202/S

  • Osciloscópio Portátil Fluke ScopeMeter 190 Série II 190-202/S

Fluke 190-202/S – 20 years of ScopeMeter® Test Tool Innovation

As the first two-channel portable scope safety rated CAT III 1000 V / CAT IV 600 V, the Fluke ScopeMeter 190-202/S combines an unprecedented level of performance, ruggedness, and portability with 200 MHz bandwidth and real-time sampling rates up to 2.5 GS/s and 200 ps resolution to capture noise and other disturbances. This model features deep memory up to 10,000 samples per channel; so you can examine very small parts of the waveform in detail, and it is IP-51 rated to withstand dust, drips, humidity, and wide temperature variations. Fluke ScopeMeter test tools are hand-held battery operated, designed to meet the demands of field service professionals.

Gain Four Times the Diagnostic Power Plus CAT IV Safety Rating

The Fluke ScopeMeter 190-202/S portable scope is double-insulated two-channel floating oscilloscopes safety rated for measurements in CAT III 1000 V/CAT IV 600 V environments.

Three-dimensional testing for industrial systems

Inspect input signals, output feedback loops or safety interlocks simultaneously to find a range of problems including:

  • Circuit voltage/current overloading
  • Signal timing measurements and synchronization issues
  • Attenuation/input impedance mismatch
  • Signal fluctuation/drift

Three-phase testing for diagnosing VSD, power inverters, and converters

  • Test for harmonics, transients and loads at the three-phase power input
  • Troubleshoot DC to AC converters for faulty IGBT gates or filter circuits
  • Test PWM output for reflections and transients or voltage unbalance

Safely measure from mV to kV

Standard probes that cover a wide application range from mV to kV prepare you for anything from micro-electronics to heavy duty medium voltage electrical applications. Independent isolated inputs eliminate the risk of accidental ground short circuits by allowing you to make measurements in mixed circuits with separate ground references.

Take on the harshest conditions with the only IP-51-rated Scope on the Market

Rugged and shock-proof, all ScopeMeter portable oscilloscopes are built for harsh environments. Their sealed cases protect them from dust, water vapor, drips, humidity and airborne pollutants ensuring reliable accurate performance every time you need them.

Built in multimeter to quickly and conveniently perform precise measurements

Built-in digital multimeter 2-channel models with isolated dual input scope and dedicated digital multimeter. Conveniently switch from waveform analysis to precise multimeter measurements using the built in 5000 count digital multimeter. Measurement functions include V DC, V AC, V AC + DC, resistance, continuity and diode test. Measure current and temperature using suitable shunt, probe or adapter with wide range of scaling factors.

Work a Full Shift on a Single Charge

New high-performance batteries take advantage of Li-ion technology to keep you going strong for up to four hours. And with the easy-access battery door you can make battery swaps fast.

Capture and Share Waveforms Easily with New USB connectivity

Two USB ports, electrically isolated from measurement input circuits offer you easy USB connectivity to a PC or USB memory devices. Store unlimited waveform, screen captures or instrument steups to a USB memory device. Connect to a PC USB interface to transfer and archive critical measurement data using FlukeView software for windows.

See a Stable Display Instantly with Connect-and-View&trade Triggering

Connect-and-View™ automatically sets up correct triggering by recognizing signal patterns. Without touching a button, you get a stable, reliable, and repeatable display of virtually any signal including motor drive and control signals. Expedites measuring several test-points in rapid succession.

Record Up to 48 Hours of High-Resolution Waveforms with ScopeRecord™

ScopeRecord memory stores up to 30,000 data points per channel, capturing intermittents and fast glitches. (Two sets of multiple-channel recordings can be stored for later analysis.)

Stores events like motion profiles, UPS, power supply, and motor start-ups

With the Stop-on-Trigger mode, the ScopeMeter 190-202/S automatically recognizes a power failure and stores the waveform data preceding it

With the waveform zoom (up to 100x) you can look at the smallest details, like individual power cycles

Record up to 22 days with TrendPlot™ paperless recorder to find intermittent faults

Intermittent faults can be caused by bad connections, dust, dirt, corrosion, or simply broken wiring or connectors. Line outages, sags, or starting and stopping a motor can also cause a machine to stop. The TrendPlot function in the Fluke ScopeMeter test tool helps find those faults by:

  • Plotting minimum and maximum peak values and average over time up to 22 days
  • Plotting any combination of voltages, amps, temperature, frequency and phase for all four inputs, all with time and date stamp to pinpoint faults


Bandwidth: 200 MHz

Number of channels 200 MHz: 2 channels

Real-time sample rate: 2.5 GS/s

Inputs: 2 scope plus DMM input

Independently floating isolated inputs: Up to 1000 V CAT III/600 V CAT IV between inputs, references and ground

Timebase range: 2 ns - 2 min/div

Input sensitivity: 2 mV-100 V/div

Trigger types: Connect-and-View™, Free Run, Single Shot, Edge, Delay, Dual Slope, Video, Video Line, Selectable pulse width, N-Cycle

Trigger source: Any scope input channel, or external via DMM input

Glitch capture: 8 ns

Scope measurements

Cursor: 7

Automatic: 30

Maximum record length

ScopeRecord mode: 30,000 pts

Scope mode: 10,000 pts per input

Persistence: Digital persistence giving analog oscilloscope-like waveform decay

Waveform compare: Waveform reference with automatic Pass/Fail testing

DMM Specification

Meter inputs (also used as External Trigger Input for the Oscilloscope Mode): 4 mm banana inputs, fully isolated from scope inputs and from scope ground

Maximum resolution: 5000 counts

Measurements: VDC, VAC rms, VAC + DC rms, Resistance, Continuity, Diode Test, Current (through clamp or shunt), Temperature °C or °F (using optional converter)


Screen + Setup: 30

Recording: 10

Display: 153 mm full color LCD with fast update rate

Environmental Specifications

Operating temperature:

0 °C to 40 °C Including Batteries

0 °C to 50 °C Excluding Batteries

Storageemperature: -20 °C to +60 °C

Operating altitude:

Up to 2,000 m (6666 ft) for CAT IV 600 V, CAT III 1000 V

Up to 3,000 m (10,000 ft) for CAT III 600 V, CAT II 1000 V

Safety Specifications

Electrical safety: 1,000V CAT III/600V CAT IV (EN61010-1)

Mechanical and General Specifications

Size: 270 x 190 x 70 mm

Weight: 2.2 kg

Li-Ion battery: BP290 2400 mAh battery up to 4 Hours included standard

Included Accessories (Two channel models):

VPS410 Voltage Probe Sets (one red, one blue)

TL175 TwistGuard™ safety designed Test Lead Set (red and black)

BC190 Battery Charger/mains Adapter

BP290 2400 mAh Li-ion Battery

Handstrap (affixed to instrument)


Multi-Language User Manuals on CD-Rom

FlukeView ScopeMeter® demo package (restricted functionality)

USB Interface Cable

Manual do Usuário

Suplementação do Manual do Usuário

Guia dos Programadores

Especificação do Produto

Dados Técnicos

Escreva um comentário

Nota: HTML não suportado.
    Ruim           Bom

Perguntas e respostas

Osciloscópio Portátil Fluke ScopeMeter 190 Série II 190-202/S

    Preço sob

Voltar ao inicio